HORIZONTAL COOLING CHAMBER DIE-CASTING MACHINES
特点：
本机采用电气（三菱PLC）、液压（进口油研）联合控制，具有手动与自动循环两种工作程序。合型采用曲肘扩力机构，液压马达带动齿轮调模装置。工作平稳可靠；压射系统采用三级压射，并特设一级快速辅助跟踪机构；设有无级可调的下偏心浇口。本机可供压铸中等大小的铝、锌、铜等有色金属压铸。
This machine has hand and voluntarily circulating two working programs with electrical, hydraulic joint control. Join type to adopt bent elbow expand force organization, it is smoothly reliable to work; Press to shoot system adopt 4 levels press to shoot, and ad hoc a level is assisted fast to trail organization; Set center to sprinkle mouth with stepless adjustable take off partial sprinkle mouth. This machine provides the die-castings of nonferrous metal such as aluminum, zinc and copper for die-casting medium size.
| 合型力 Die locking force (KN) |
1400 | 压射力(小-大) Injection force (min-max) (KN) |
102-200 | 建压时间 Pressure build up time (ms) |
＜30 |
| 动型板尺寸（水平×垂直） Size of moving platen(mm) |
650×650 | 压室直径 Diameter of shot shot sleeve (mm) |
40,50,60 | 空循环周期 Dry cycle (sec) |
7 |
| 拉杠直径 Die meter of tie bar (mm) |
80 | 压射偏心位置 Eceentric position of shot sleeve (mm) |
0-120 | 管路工作压力 Pipe line pressure (Mpa) |
12 |
| 拉杠内间距(水平×垂直) Inner space between the bars(HV) (mm) |
420×420 | 一次性金属浇注量(铝) Dosage of fluid metal per shot(AL) (kg) |
1.6 | 电动机功率 Motor power (Kw) |
11 |
| 压型厚度(最小最大) Die thickness(min-max) (mm) |
250-500 | 铸件投影面积（小-大） Projecting area of casting(min-max) (cm2) |
108-409 | 机器重量 Machine weight (Kg) |
5000 |
| 动型座板行程 Die stroke (mm) |
350 | 压射比压（小-大） Injecting pressure(min-max) (Mpa) |
33-125 | 机器外形尺寸（长×宽×高） Overall dimensions （L×W×H） (mm) |
4750×1150×1800 |
| 顶出行程 Ejection stroke (mm) |
80 | 压射行程 Injecting stroke (mm) |
320 | 电气总功率 Electric Power (KW) |
15 |
| 顶出力 Ejection orce (KN) |
100 | 压射速度 Injecting speed (m/s) |
6 | 工作电压 Working voltage(ACV) |
380(50Hz) |
